3D printed clip on wide bottom flanges to increase the surface area of Leluv style rounded flanges.  Sizes for 1.35 to 1.75".

• Force reduction is infinitely easier if you have stiff material to transfer the force. Silicone is soft, not great for this where stiff polymers are best (PC, acrylic, PETG, PLA, etc). So, if we allow a combination of stiff material and soft material in series to distribute then soften the load to your pelvis, you can thus make the uncomfortable, comfortable. Cue the angelic halleluiah.

• These are best in combination with the other silicone based pads I make but they are improvements upon rounded flange comfort

• 3D printed in PETG and hand cut/sanded so the contact surface will be smooth but do not expect injection molded surface finish.

• Tip:  These likely require air gap sealing when snapping into place. It is advisable to use non-permanent solutions like petroleum jelly or white Elmer's glue (or equivalent non-toxic, low strength glue). Wipe away any residual glue after clipping on flange.

• DOES NOT FIT FLAT FLANGE, FLANGELESS, OR ELLIPTICAL CYLINDERS